Pond & Waterfall Cleaner 1kg

API POND & WATERFALL CLEANER uses the power of active oxygen to deep-clean pond surfaces, waterfalls, fountains, and bird baths on contact. It is safe for all fish and aquatic plants, and should be used as needed to maintain a clean, clear pond or outdoor water feature.

Size: 1 KG

Good water quality is key to a healthy, beautiful aquarium or pond. The tap water you use often contains disinfectants, such as chlorine and chloramines, to make water safe for drinking. These same disinfectants are highly toxic to aquatic life, and may destroy fish gill tissue. They also prevent the uptake of oxygen, leading to fish loss. Even low levels of chlorine and chloramines irritate delicate fish tissue.

API water treatments and conditioners work quickly to make water conditions superior and safe for your fish, so you can get the most out of fish keeping and easily start or maintain your aquarium or pond. Whether you’re detoxifying ammonia, or treating your fish for disease, API brand has the right treatment for your fish keeping needs.

Instructions:

For ponds: keep pumps and aeration operating during application. Surface debris will turn white when treatment is complete. Remove with a net. If accidently applied to plant leaves, wash off immediately. Add 2 tsp. for each 100 gallons of water, sprinkling evenly around the pond. Wait 24 hours, before repeating treatment.

For waterfalls and fountains: turn off water pump. Powder must come in contact with wet debris to be effective. Wait 15 minutes before turning pump on again. Repeat as needed.

For birdbaths: sprinkle directly into the birdbath water. Wait 15 minutes, then rinse and refill the birdbath.