Brine Shrimp Hatcher

This convenient Brine Shrimp Hatcher/Incubator is the simple and easiest way to hatch brine shrimp for feeding your fry, small fish or reef life. NOT designed to raise the brine shrimp to full size.

Contents
Brine shrimp hatchery with stand and lid (30cm tall x 5.5cm diameter).
Air tubing

Required but NOT included
An aquarium air pump with regulator valve, check valve, eggs and coarse salt are required and is NOT included.

Instructions
Connect air pump, check valve and air regulator value to hatchery.
Fill hatchery to about 90% (or to fill line) with aquarium or clean water.
Add ±10 grams course (tonic salt) or hatching salt.
Add 3 – 5 grams brine shrimp eggs.
Allow 24 to 48 hours for brine shrimp to hatch. Hatching time depends on temperature and egg quality. Brine shrimp eggs hatch best at 24 to 29 degrees Celsius.

Using a light source from the top of the incubator reduces hatching times

Collecting the Brine Shrimp is best done by turning off the air and allowing the water to settle. Once the water settles the shrimp sink and the empty shells float. Moving the light source to the bottom of the incubator attracts the shrimp down.  You then allow the live baby brine shrimp to flow out of the airline into a net or container and feed to the fry.